Abilities and functions of the "Diascan"
Program
• The visual demonstration of the whole
testing process is an important advantage. The whole
investigating process of each organ is displayed on the monitor
and the tested person can see it. When selecting the health
improving preparations the specialist has to show to the tested
person the efficiency of the recommended preparations, and this
would be the most effective motivation for the patient to
improve his health taking the preparations.
The next advantage of the method is the
control function, allowing to examine the process in dynamics,
being based on the earlier received results and predicting the
development of disease with taking into account the possible
methods of treatment. This function allows to estimate the
efficiency of the prescribed preparations and to correct the
selected health improving program, if necessary.
The "Diascan" Program contains
detailed encyclopaedic descriptions of all standards and
becomes an unique handbook. The operator making the test with
the HSC "Diascan" complex can see the description of any
standard and comments to prescribe this standard, before
diagnostics is made. It allows to prevent the superfluous and
wrong diagnoses and recommendations.
• The simplified selection of standards
- the most probable standards for analyzed organ are placed in
the beginning of the list of standards. The least authentic ones
are placed at the end of the list of standards. When selecting a
correct standard the operator has not to check the list of
standards - the most probable, and accordingly, suitable for
being inserted in the epi- crisis, are in the beginning of the
list and it is not necessary to look for them in
• Standard fine tuning function: this
function allows to predict the probability of development or of
progressing of the process characterized by the standard in the
near future. Usually when using the fine tuning function we
confirm a high probability of the standard; that’s why the
standard must be added to the epicrisis since the process
characterized by the standard has already reached a high
probability of presence in the organ or is going to reach it in
the near future and it is necessary to start fighting against
this process. On the basis of the obtained standards the health
improving preparations can be selected.
• Analysis of the organ centre state:
the given function allows to carry out the directed analysis of
the pathological center state of a concrete organ; it enables to
define the most probable processes describing the pathological
center state of an organ. It enables to prescribe purposefully
the health improving preparations influencing the pathological
center and that will allow to fight most effectively against the
pathological processes and to remove an inflammation maximal
quickly.
• Automation of the epicrisis preparation
process
satisfies the inquiries of all HSC "Diascan" users.
Recommendations on a diet, physiotherapy exercises, sleep and
rest regime, prescribing some additional analyses and
consultations of specialists can be added by pressing of a pair
of buttons. Figure
• Individual selection of health improving
preparations. Program posses the means of visual
demonstration of efficiency of the health improving
preparations, allowing to test some preparations and to choose
the most effective one. This ability is supported with a huge
database containing the allopathy, homoeopathy preparations,
herbal medicines and Dietary Supplements and also the
"Vegeto-test" and "Comparative analysis" functions. These
functions allow to show to the tested patient the virtual state
of his concrete organ after he would have taken the recommended
preparations. The "Comparative analysis" method allows to
compare the initial state of a concrete organ with a virtual one
after the prescribed course of medical treatment.
Vegeto-test
The "Diascan" program is attractive
because it enables an individual motivated selection of health
improving and preventive preparations. This ability is supported
with a huge database containing the allopathy, homoeopathy
preparations, herbal medicines and Dietary Supplements and also
the "Vegeto-test" and "Comparative analysis" functions. These
functions allow to show to the tested person the virtual state
of his (her) concrete organ after he (she) would have taken the
recommended preparations. When making the vegeto-test, the
amplitude-frequency characteristics of a concrete organ are
compared with an electromagnetic energy diagram of the selected
preparation in dynamics.
Using the "Vegeto-test" method we can get the predicted state of
an organ after a virtual course of medical treatment with the
recommended preparation. To choose the most effective
preparation for each organ or for each pathological process,
several preparations can be tested. Using the results of the
"Vegeto-test" and the "Comparative analysis" function, the
specialist can choose the most effective preparation; this
choice will be made on the basis of indications of the
equipment, instead of on the basis of a subjective opinion of
the specialist. This is a way to make an individual selection of
health improving preparations and to reach the greatest health
improving effect.
Comparative analysis
Using the "Comparative analysis" method we
can compare the initial state of a concrete organ with its
virtual state after having a virtual health improving course
using the recommended preparation, or with the state of this
organ after having a real health improving course prescribed by
a specialist after a control testing. Thus the program
automatically shows the information about the changes of the
organ’s state: "reduction of the center’s area by XX %",
"strengthening of the compensator reactions by XX %". This is an
effective way to motivate the doubting patients to buy the
Dietary Supplements and other health improving preparations
individual selected for him.
The main advantage of this function is the possibility of a
visual demonstrated checking the results after having a health
improving course enabled with the control function.
Control function
After having had the health improving course
prescribed by the specialist on the basis of the primary
testing, the client will be recommended to be tested with a
control test; at this test the state of the organ will be
examined which was recognized as having problems when being
primary tested and as result we have a diagram of the state of
an organ after a health improving course. Now we can compare the
initial state of the problem organs with the diagram of the
corresponding organs obtained at the control test. This function
is active used by the HSC "Diascan" users because of its
visual demonstration and its simple form. Thus the program
automatically shows the information about a quality changes
state of an organ.
The application of this function is useful
both to the specialist making testing and to the "leader" of the
client and also to the client himself since it motivates him to
continue his health improving. Thanks to the functions of
"control" and of "comparative analysis" the specialist can
correct the health improving program in time; on doing it, the
specialists is guided by a real information about the state of
the client’s organs.
Basing on the reaction of the organism when
being influenced by the prescribed health improving
preparations, the specialist can add or take away some
preparations. This will help to prescribe to the client the most
effective preparations.
Reprinter and manufacturing of
informative preparations (spectronosods)
The HSC "Diascan" contains a
bio-resonant chamber allowing to test the health improving
preparations not inserted to the database of the "Dianel"
program. It will be fulfilled with the help of the "Vegeto-test"
function. Thus on the command of the "Dianel" program with the
help of the bio-resonant chamber the bio-energetic potential of
the preparation will be caught, added to the diagram describing
the state of the vegeto-tested organ and one have at once a
virtual organ predicting the state of the organ after the course
of taking the tested preparation. The efficiency of the tested
preparation can be also evaluated with the function "Comparative
analysis".
The bio-resonant chamber enables also the making of informative
preparations (spectronosods). This is possible when using the
"Reprint" function of the "Diascan" program. As
spectronosod can be used the diagram of any health improving
preparation inserted to the database or an inverted diagram of a
pathological process which the specialist wants to make. The
chosen diagram will be written on a matrix (spirit, sugar etc.)
and the spectronosod is ready. After this the resulted substance
on which the diagram of the chosen standard was transferred will
be taken as prescribed by the physician.
All interested persons can be taught to work with the Hardware
and Software Complex "Diascan"
|
